A lot of people are having perceived issues with (mainly DS3's) and what is called the cold boot issue.
This issue seems to consist of 2 issues as far as I can tell.
Failure to boot, clear cmos does not work, board is boat anchor.
Bios settings not retained on reboot.
(Several users have found that legacy USB devices are the cause of this issue. Try removing all un-needed USB devices and see if the issue goes away).
Actually the second problem is the classic "cold boot" as first reported.

for Gigabyte Mainboard OC is a big problem,
cos the fucking Dual BIOS, the mainboard will boot up and display awhile and reset back to default only can use the MIB or CIA to OC abit
Regards

Problem is, recently the computer has started to do this randomly after cold starts. Literally cold, I will come home from work, turn on my computer, and it'll do that "woops, settings not right, shutdown restart reset back to 1.8ghz" dance.  Then I have to go into my BIOS and change the FSB and memory settings back to get my machine overclocked to 3.0ghz. After that, I'll use my computer all night with CPU intensive games and 3D modeling and it'll happily stay stable at 3.0ghz.

我Q6600(9x400)/P35DS4/G.SKILL800,5/5/5/15/8800ultra試過同樣情況,隔左一晚要manual reset cmos

原帖由 nissin 於 2007-10-30 22:25 發表
唔好熄機

原帖由 觀星是答案 於 31/10/2007 01:34 發表
Gigabyte .... 玩具來 o者
用過一塊 478 底板; 個 feel 好唔穩陣

原帖由 戇男 於 2007-10-31 11:58 發表
用番asus又如何？

原帖由 觀星是答案 於 2007-10-31 01:34 發表
Gigabyte .... 玩具來 o者
用過一塊 478 底板; 個 feel 好唔穩陣

原帖由 nissin 於 2007-10-31 17:23 發表


對我黎講, Gigabyte 同 ECS 同等代遇

原帖由 Oatrina 於 2007-10-31 09:56 PM 發表


妖啱啱開黎開去都開唔到機...

之前set行430 x 7, 頭先一開機就同我熄機, 再著番又hang晌到, 我熄左去再去, 又hang晌到..連續三次。最後熄埋火, 再開, 又hang...

最後熄多次火牛, 再開先ok ...

原帖由 Error_404 於 2007-10-31 22:07 發表

超到咁
不如唔好超

原帖由 Oatrina 於 2007-10-31 22:14 發表


因為晌windows用gigabyte個 easytune5冇得set memory multipler, 所以晌bios set左行1:1後, FSB最少要400MHz要可以keep住行DDR2-800.

然後打機時就要晌個easytune 5入面按100下, 按到FSB 500為止

Gigab ...

原帖由 nissin 於 31/10/2007 17:23 發表


對我黎講, Gigabyte 同 ECS 同等代遇

原帖由 firework 於 2007-11-1 09:37 發表
何必呢，行咁高外頻， nb加電試試吧
超唔超對打機幾乎冇影響

原帖由 Oatrina 於 2007-11-1 11:34 發表


nb同mch都加左0.3v了

2.33G同3.5G晌壓片時差天共地....

原帖由 firework 於 2007-11-1 12:07 發表

個os唔穩定，問問題多，因快得慢更難受
有時上唔到就係上唔到，冇得強求，或者換o左塊板同cpu再試，giga有好多人都有咁o既情況，其實400fsb唔算小超了 ...

原帖由 Enzo 於 2007-11-1 10:46 發表
d電腦已經好q快喇
我唔覺有oc o既需要

原帖由 觀星是答案 於 2007-11-1 14:39 發表

o/c 並非因為有實際需要
而係要滿足虛榮感

原帖由 Oatrina 於 2007-11-1 17:20 發表


我又想壓片快, 但又買唔起四核

原帖由 nissin 於 2007-11-2 00:10 發表
有測試報告講過G牌板超 1MHz 都死
你search唔到咩